Tektronix TG700, User Manual

Page: 277 / 343

HD3G7 HD 3 Gb/s SDI Video Generator
available. There are several sample structures to choose from. Press the left ( ◄ )
or right ( ► ) arrow buttons to scroll through the available options:
3G non-fast-progressive formats
• RGB 444 10b
• RGB 444 12b
• RGB+A 444 10b
• YCbCr 444 12b • YCbCr 444 10b
• YCbCr+A 444 10b
• YCbCr 422 12b
• YCbCr+A 422 12b
1
1
Level B mapping only
3G fast-progressive formats
• YCbCr 422 10b
2×HD formats
• YCbCr 422 10b
2K formats
• RGB 444 12b • XYZ 444 12b
When the desired sample structure is displayed, press the ENTER button to
select it.
MOVING PICTURE. Scrolls the active picture area of the output test signal. Select
this menu item, and then press the ENTER button to access the MOVING
PICTURE submenu. (See page 3-168, MOVING PICTURE Submenu .)
AUDIO (EMBEDDED).
Sets the parameters for embedded audio on the serial digital
signals. Use the left ( ◄ ) or right ( ► ) arrow button to select Group 1 , Group 2 ,
Group 3 , or Group 4 . Once the group is selected press the ENTER button to
access the AUDIO GROUP submenu. (See page 3-169, AUDIO (EMBEDDED)
Submenu .)
If Level B mapping is selected all four groups are available in both Link A and
Link B, for a total of eight groups.
TIMING.
Sets the timing offset of the serial digital video outputs relative to the
internal reference signal (frame reset signal). This allows you to adjust the timing
of this module relative to another module or to an external reference (such as
Genlock or GPS). Select this menu item, and then press the
ENTER button to
access the TIMING submenu. (See page 3-171, TIMING Submenu .)
TIMECODE.
Use this menu to set timecode parameters for the selected output.
Press the ENTER button to access the TIMECODE submenu. (See page 3-173,
TIMECODE Submenu .)
VIDEO.
Enables or disables the components of the output serial stream, such as
YCbCr. Select this menu item, and then press the ENTER button to access the
VIDEO submenu. (See page 3-175, VIDEO Submenu .)
TG700 TV Signal Generator Platform User Manual 3–165