Atlona Technical Support: +1 877.536.3976 option 1
Update Instructions
AT-HDR-M2C
Updating the firmware can be completed using either the USB interface or the web GUI. Atlona recommends using
the web GUI for updating the firmware. However, If a network connection is not available, the AT-HDR-M2C firmware
can be updated using a USB-A to USB mini-B cable.
Requirements
• AT-HDR-M2C
•
Firmware file (.bin file)
•
Computer
1. Connect an Ethernet cable from the computer, containing the firmware, to the same network where the AT-HDR-
M2C is connected.
2. Go to the System page in the web GUI.
3. Click the
Choose File
button, under the
Firmware Update
section.
4. Browse to the location of the firmware file, select it, and click the
Open
button.
5. Click the
Update
button.
6. The following dialog will be displayed.
Using the Web GUI
Choose File button
