Tektronix TDS5032, Manual

Page: 47 / 248

Operating Basics
Chirp Measurement
To perform a Chirp test, connect the unit under test and the single-ended probes
to acquire data. You can measure the Data for Chirp K amplitude, Chirp K
duration, and Reset duration. You need to manually verify that there are three
K–J pairs in less than 500 µs.
Figure 13: Results of the Chirp measurement
The TDSUSB2 application automates this process and automatically generates
the results and reports for the results of Chirp-K duration, Chirp-K amplitude,
and Reset duration.
Figure 14: Summary results of the Chirp measurement
TDSUSB2 Universal Serial Bus Measurement Package 33