Tektronix TDS5032, Manual

Page: 37 / 248

Operating Basics
Figure 6: Test fixture
Setting Up the Device Details
You can enter a unique identifier (ID) and description for the unit under test
(device). The identifier and the description appear in the generated reports for the
tests performed on the unit under test. You can either type in the text directly in
the boxes for these fields, or use the keypad or a keyboard. You can also choose
to generate automatic IDs for the unit or enter a prefix using the keypad.
Figure 7: Setting up the device details
Note: If you check the Generate Automatic ID, the Device ID field is disabled
and the Prefix field is enabled. The report for Inrush Measurement displays
details of the Signal Setup with the device description.
TDSUSB2 Universal Serial Bus Measurement Package 23