Tektronix TDS 510A, Instruction Manual, Page: 88 / 116

Performance Tests
1–74
TDS 510A Performance Verification and Specifications
Use the keypad to set the number of fields to 1 (press 1, then
ENTER).
Press the side-menu Sync Width.
Use the keypad to set the width to 400 ns (press 400, SHIFT, n,
then ENTER).
Press the side-menu –more– 1 of 2. Then press V1 Start Time.
Use the keypad to set V1 start time to 10.10
m
s (press 10.10, SHIFT,
m
, then ENTER).
Press the side-menu V1 Stop Time.
Use the keypad to set V1 stop time to 10.50
m
s (press 10.50, SHIFT,
m
, then ENTER).
Press the main-menu Type pop-up to select Edge.
Press HORIZONTAL MENU.
Press the main-menu Record Length.
Select the side-menu 1000 points in 20div. If needed, first press the
side-menu –more– until you see the appropriate side-menu item.
Turn the HORIZONTAL POSITION knob to position the trigger
‘T’ two divisions to the left of the center screen.
Press MEASURE.
If needed, press the main-menu Select Measrmnt.
Press the side-menu Negative Width.
Press the side-menu Period.
b. Set up the pulse generator for Sync Duty Cycle Test:
Set PULSE DURATION to 50 ns.
Set PERIOD to 10
m
s.
Set OUTPUT (VOLTS) to –1 for LOW LEVEL and +1 for HIGH
LEVEL.
Depress the COMPLEMENT button.
Be sure BACK TERM is depressed (in).