Tektronix TDS 510A, Instruction Manual, Page: 111 / 116

Specifications
TDS 510A Performance Verification and Specifications
2–13
Table 2–12: Certifications and compliances
EC Declaration of Conformity Meets intent of Directive 89/336/EEC for Electromagnetic Compatibility and Low Voltage Directive
73/23/ECC for Product Safety. Compliance was demonstrated to the following specifications as
listed in the Official Journal of the European Communities:
EN 50081-1 Emissions:
EN 55022 Class B Radiated and Conducted Emissions
EN 60555-2 AC Power Line Harmonic Emissions
EN 50082-1 Immunity:
IEC 801-2 Electrostatic Discharge Immunity
IEC 801-3 RF Electromagnetic Field Immunity
IEC 801-4 Electrical Fast Transient/Burst Immunity
IEC 801-5 Power Line Surge Immunity
Low Voltage Directive 73/23/EEC:
EN 61010-1
Safety requirements for electrical equipment for measurement,
control, and laboratory use
FCC Compliance Emissions comply with FCC Code of Federal Regulations 47, Part 15, Subpart B, Class A Limits
Certifications Underwriters Laboratories certified to Standard UL3111-1 for Electrical Measuring and Test
Equipment.
Canadian Standards Association certified to Standard CAN/CSA-C22.2 No. 1010.1-92, Safety
Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use.
Temperature (operating) 0
_
C to +50
_
C
Altitude (maximum operating) 2000 meters
Safety Class Test and Measuring
CSA Certified Power Cords CSA Certification includes the products and power cords appropriate for use in the North America
power network. All other power cords supplied are approved for the country of use.
Overvoltage Category Category: Examples of Products in this Category:
CAT III Distribution-level mains, fixed installation
CAT II Local-level mains, appliances, portable equipment
CAT I Signal levels in special equipment or parts of equipment, telecommu-
nications, electronics
Pollution Degree 2 Do not operate in environments where conductive pollutants may be present.