Installation
TCP2020 Probe
1.
Align the BNC connector on the probe to
the oscilloscope input connector.
2.
Push in the probe connector and turn it to
the right to lock it in place.
3.
Connect the AC adapter to a line source
and then connect it to the probe.
NOTE.
The AC adapter can also be connected
to the probe before connecting the probe to the
oscilloscope.
When the probe is connected to the
oscilloscope and the AC adapter, the probe
Power
LED lights green.
4.
Degauss the probe. (See page 5,
To disconnect the probe, turn the probe
connector to the left and pull the probe away
from the instrument.
4
20 A Current Probes Instruction Manual
