Compliance Information
Additional Compliance
IEC 61010-1:2001. Safety requirements for electrical equipment for measurement, control, and laboratory use.
IEC 61010-2-032:2002. Particular requirements for handheld current clamps for electrical measurement and test equipment.
Equipment Type
Measurement
Pollution Degree Descriptions
A measure of the contaminates that could occur in the environment around and within a product. Typically the internal environment
inside a product is considered to be the same as the external. Products should be used only in the environment for which they
are rated.
Polution Degree 1. No pollution or only dry, nonconductive pollution occurs. Products in this category are generally
encapsulated, hermetically sealed, or located in clean rooms.
Polution Degree 2. Normally only dry, nonconductive pollution occurs. Occasionally a temporary conductivity that is caused by
condensation must be expected. This location is a typical of
fi
ce/home environment. Temporary condensation occurs only
when the product is out of service.
20 A Current Probes Instruction Manual
xiii
