Tektronix TCP0020, Instruction Manual

Page: 86 / 103

Performance Veri fi cation
Equipment Required
Table 6 lists the equipment required for the performance veri fi cation procedure.
Table 6: Test equipment
Description and quantity Performance requirement Recommended example 1
Oscilloscope TekVPI interface, 500 MHz or greater bandwidth Tektronix DPO4000
High Amplitude Pulse
Generator Risetime <500 ps, pulse width ≥ 100 ns, amplitude
>10 Vpp into 50 Ω
Picosecond Labs 2600C
Calibrator DCV: 0.2% accuracy, 0 to ±1.5 V, square wave output
ACA: 0.25% accuracy, 0 to ±6 A, square wave output Fluke 9100
TekVPI Calibration/Veri fi cation
adapter 2
TekVPI interface 067-1701-xx
Digital multimeter (DMM) ≥ 2 volt range, ≥ 1% accuracy Keithley 2700
DC current loop 5 turns 18 AWG coated wire on 3 inch form See instructions that follow
HF current loop 50 Ω ±0.5%, BNC male connector 067-2396-xx
Adapter BNC-to-dual banana 103-0090-xx
Adapter 2 SMA male-to-BNC female 015-1018-xx
BNC cable 50 Ω , 0.76 m (30 in) length 012-0117-xx
1 Nine-digit part numbers (xxx-xxxx-xx) are Tektronix part numbers
2
Required for TCP0020 probe only
62 20 A Current Probes Instruction Manual