Performance Verification
34
P6209 4 GHz Probe Instruction Manual
Table 5: Equipment required for performance verification and adjustment (Cont.)
Item description
Recommended example
Performance
requirement
Feedthrough Termination
BNC, 50
Ω
±
0.05
Ω
011-0129-00
Coaxial cables (2)
Male-to-Male SMA, 20 in
174-1427-00
Adapter
High Frequency Probe tip
adapter w/50
Ω
Termination
015-0678-00
Adapter
SMA Female-to-Female
015-1012-00
Adapter
SMA Female-to-BNC Male
015-0572-00
Adapter
SMA Male jack
131-7128-00
Adapter
BNC Female-to-Dual
Banana
103-0090-00
Adapter
Y-lead adapter
196-3457-00
Adapters (2)
KlipChip adapter
206-0364-XX
1
Provides DC stimulus if using a TDS 820
Equipment Setup
Use this procedure to set up the equipment to test the probe.
1.
Connect the probe to the oscilloscope.
2.
Connect a Y-lead adapter with KlipChip adapters attached to the
probe.
3.
Turn on the oscilloscope and enable the channel.
4.
Allow 20 minutes for the equipment to warm up.
Summary of Contents for P6209
