Performance Verification
Version 00b
MTS400 Series Performance Verification and Specifications Technical Reference
39.
In the MPEG Player window, stop the player by clicking the black Stop
button on the toolbar.
40.
Start the TSCA by double-clicking the
icon on the desktop.
41.
In the MPEG Player toolbar, click the green Play arrow to start playing the
transport stream file.
42.
In the TSCA window, close any dialog boxes and select
Real-time
from the
toolbar.
43.
In the Interfaces drop-down box, select DVB Parallel.
44.
Click OK to close the Open Transport Stream window.
After a few seconds, the TSCA window opens with the analysis results of
the SPI transport stream (see Figure 2
11).
45.
Verify the following in the analyzer window:
H
The TS Availability and Sync indicators at the bottom left of the
analyzer window are green.
H
The bit rate readout at the bottom of the window reads 19.393 Mbps.
NOTE
. It is normal if indicators other than the TS Availability and Sync turn red.
This merely indicates that the software is operating and has detected errors in
the transport stream.
46.
Close the TSCA by clicking Exit in the File menu.
Verifying the SPI Interface
