Performance Verification
Version 00b
MTS400 Series Performance Verification and Specifications Technical Reference
27.
Perform the following steps to verify that the transport stream file was
recorded to the F:\ drive of the instrument:
a.
In the Record menu of the TSCA, click Record Settings to open the
dialog box shown in Figure 2
b.
Click on the ellipsis box at the far right of the Path entry box to open the
Set Recording Name window.
c.
In the Set Recording Name window, use the up arrow to navigate to the
F:\ drive on the MTS400 Series system.
d.
Verify that the following file name appears:
record test.mpeg
e.
Click Cancel to close the Set Recording Name window.
f.
Click Close to close the Record Settings window.
28.
Close the TSCA by clicking Exit in the File menu.
