Version 00b
MTS400 Series Performance Verification and Specifications Technical Reference
Performance Verification
The procedures in this section allow you to verify the performance of the
following MTS400 Series MPEG Test System components:
H
ASI, SMPTE310M, and SPI signal interfaces
H
RF interfaces
H
IP interface
H
MPEG Player (play and record functions)
H
TS Compliance Analyzer (TSCA)
Preparation
Before you begin the
Performance Verification
procedures, review the following
information:
H
Ensure that the procedures are performed only by qualified service personnel
who have read the
General Safety Summary
at the front of this manual.
H
Ensure that the service personnel are familiar with system operation (refer to
the
MTS400 Series MPEG Test System Getting Started Manual
).
You will need the following equipment to perform the verification procedures:
H
75
BNC-to-BNC cable (quantity of one)
Tektronix part number 174-4954-00
H
DB25-to-DB25 cable (quantity of one)
Tektronix part number 174-4955-00
H
A copy of the “sym1.mpg” transport stream file on the E:\ drive of the
MTS400 Series system being tested
NOTE
. The “sym1.mpg” transport stream file is supplied with every instrument
in the following directory: E:\Test Streams.
If this file has been deleted, it cannot be restored. After completing this
performance verification, you are advised to back up the test streams directory.
Required Equipment
