Model 2306-LAN Communications and Firmware Upgrade Instructions
071377001
April
2022
5
6. To set the SUBNET-MASK, go to
SUBNET-MASK
and press
ENTER
. Use ▲ and ▼and ◄ and ► to enter
a valid SUBNET-MASK. The Default SUBNET-MASK is 255.255.255.000.
7. To set the PORT, go to
PORT
and press
ENTER
. Use ▲ and ▼ and ◄ and ► to enter a valid PORT
number. The default PORT is 5025. Range (0 through 65535).
8. To reset the LAN configuration, go to
LAN RESET
and press
ENTER
. Select
YES
to reset all LAN
configurations (select
CANCEL
to keep the current LAN configuration).
9. Press
ENTER
for the LAN configuration to take effect and return to the main menu.
LAN configuration through a computer
You will need to download the 2306-LAN Configuration Tool from the
Product Support and Downloads web
. This tool provides the interface needed to set up the 2306-LAN IP address, subnet mask, gateway, and
port from a computer. Once the executable file for the configuration tool has been downloaded to your
computer, the following information describes how to install and use the tool.
For firmware upgrade information, go to
(on page 12).
Do not use this configuration procedure for the Series 2300 models 2302, 2303, 2306, or 2308
instruments.
To use the LAN Configuration Tool:
1. Double-click the
2306-LAN Configuration Tool.exe
file.
2. Select
Scan Devices
.
Figure 5: Scan devices