![background image](http://html1.mh-extra.com/html/tektronix/keithley-2306-lan/keithley-2306-lan_manual_1077546012.webp)
Model 2306-LAN Communications and Firmware Upgrade Instructions
12
071377001
April
2022
Firmware upgrade instructions
Download the 2306-LAN Configuration Tool from the
Product Support and Downloads web page
. This tool
provides the interface needed to upgrade the firmware and set up the 2306-LAN IP address, netmask,
gateway, and port from a computer. Once the executable file for the configuration tool has been downloaded to
your computer, the following information describes how to install and use the tool.
You also need to download the firmware you want to install on your Model 2306-LAN instrument from the
Product Support and Downloads web page
Go to
LAN configuration through a computer
(on page 5) for more information about LAN configuration.
Do not use this configuration procedure for the Series 2300 models 2302, 2303, 2306, or 2308
instruments.
Connect a LAN cable from your computer to the LAN port on the rear panel of the 2306-LAN. Set the computer
IP address (
192.168.0.3
) and the Subnet mask (
255.255.255.0
), and set the instrument IP address
(
192.168.0.2
).
To use the LAN configuration tool:
1. Double-click the
2306-LAN Configuration Tool.exe
file.
2. Select
Firmware Upgrade
(see the following figure).
Figure 10: 2306-LAN Firmware Upgrade