TM
EURO CHARGER 1
INSTALLA TION GUIDE & MANUAL
Visit: www.evpeurope.com
Call: +44 (0) 1926 419441
E-mail: [email protected]
EVP Ltd, Unit 4, Benford Court, Lower Cape, Warwick, CV34 5DA
Company Registration Number: 9121263
VAT number: 196484653
INTRODUCTION
The Euro Charger, Model 091-90-xx is a compact, completely
automatic single channel battery charger designed specifically
for the fire service and emergency vehicles. Of rugged
construction, the charge is made to withstand the shock and
vibration encountered in vehicle mounted equipment. Utilizing
components which meet international safety requirements
makes this charger ideal for worldwide applications.
BATTERY CHARGER FEATURES
•
Completely automatic operation, charges battery on
demand
•
Input voltage, switch selectable, 115 volt or 230 volts
•
Output voltage regulated, eliminates overcharging battery
•
Output, current limited to protect charger from
overloading
•
Optional charge indicators
SPECIFICATION
CHARGE INDICATOR: 0-20 AMPS 5%
WEIGHT: 12 LBS
INSTALLATION
1. The Euro Charger Automatic Battery Charger should be
installed in an area with adequate ventilation.
2. Mount the charger using the four holes provided.
3. Connect the wiring from the batteries to the output
terminal strip.
4. Double check battery wiring. Verify that battery voltage
appears at the charger output terminals.
5. Set the voltage selector to either the 115 volt or 230 volt
position to match the input source available.
6. Connect the input power to the input power terminal
strip and energize charger.
7. Verify that power indicator is illuminated and charger is
charging.
WARRANTY
All products of Kussmaul Electronics Company Inc. are
warranted to be free of defects of material or workmanship.
Liability is limited to repairing or replacing at our factory,
without charge, any material or defects which become
apparent in normal use within 3 years from the date the
equipment was shipped. Equipment is to be returned, shipping
charges prepaid and will be returned, after repair, shipping
charges paid.
Kussmaul Electronics Company, Inc. shall have no liability for
damages of any kind to associated equipment arising from the
installation and /or use of the Kussmaul Electronics Company,
Inc. products. The purchaser, by the acceptance of the
equipment, assumes all liability for any damages which may
result from its installation, use or misuse, by the purchaser, his
or its employees or others.
MODEL #091-90-XX
NOTE : This charger is designed for vehicles with 3 batteries and negative ground.
Model Number Input Voltage
Input Current
Input Fuse Output Voltage Output Current
Output Fuse
091-90-12
115 / 230 Vac, 50/60 Hz 1.3 / 2.6 Amps
5 Amps
12
12
25 Amps
091-90-24
115 / 230 Vac, 50/60 Hz 1.3 / 2.6 Amps
2.5 Amps
24
6
12 Amps
