Appendix A: Interfaces
K1297-G20 Monitor User Manual
A-53
The SERIAL interface (RJ45 connector) can be used as asynchronous
serial debug port for service purposes.
1
Table A–29: Pin assignment for the SERIAL interface (DTE)
Pin
Assignment
Pin
Assignment
1
DCD
5
RxD
2
RTS
6
Ground
3
Ground
7
CTS
4
TxD
8
DTR
In addition an RJ45 10-BaseT/100-BaseT connector is provided on the
front panel (for future use, not yet supported).
Table A–30: Pin assignment for the 10-BaseT/100-BaseT interface
Pin
Assignment
Pin
Assignment
1
TX +
5
Not connected
2
TX –
6
RX –
3
RX +
7
Not connected
4
Not connected
8
Not connected
Summary of Contents for K1297-G20
