Tektronix AVG1, User Manual

Page: 36 / 146

Operating Procedures
2- 12
AVG1 Analog Video Generator User Manual
5. Press Quit/Save . A dialog box appears.
NOTE
. If you modify any signal that was shipped on the factory disks, the
platform adds an underscore to the front of the name.
6.
Touch
Save As
. A text entry window appears, as shown in the following
illustration. The platform suggests a new test signal name for you by adding
an underscore to the front of the current name.
7.
If you want to use the displayed name, touch
OK
.
8. To use a different name, do the following:
a. From the Text Entry window, delete the suggested name using the
BS key, and then enter new text. (You cannot backspace over an
underscore character.)
b. Touch Set 1 or Set 2 to provide additional sets of characters.
c. Touch OK when text is complete.
9.
Touch
Quit/Save
to exit the window.