Tektronix AVG1, User Manual

Page: 25 / 146

AVG1 Analog Video Generator User Manual
2- 1
Functional Overview
This section provides an overview of the AVG1 Generator module. If you are not
familiar with the operation of the TG 2000 Signal Generation Platform, refer to
the
TG 2000 Signal Generation Platform User Manual before reading this
section.
Figure 2--1 shows the module’s menu structure.
Edit Module window
Push Modules
button
Modules window
Signal Sets window
Touch desired signal set
(usually represents format)
Push Signal
Sets button
Push Test
Signals button
Active Signal Parameters window
To select output signal, touch
desired Test Signal icon until
desired signal is selected
Touch Module
Parameters
Touch Active
Signal Parameters
Test Signals window
Touch AVG1 module
Touch Module
Parameters
Touch Rename
Module
Rename Module window
Enter new name for
module
Touch Video, Text Overlay or
Signal Information
Video Parameters , Text Overlay , or
Signal Information window
Set video parameters, adjust text on
signal, or view information about the
selected signal
Module Timing, Circle Overlay, Trigger, or
Output Config window
Set module timing with respect to the BG1
module, create circle overlay, configure trigger or
signal outputs
Module Parameters window
Push Edit button
Touch Module Timing,
Circle Overlay, Trigger
Output, or Output Config
Touch Output to
enable or disable the
module output signal
Figure 2- 1: Menu structure for the AVG1 Generator module