Tektronix AVG1, User Manual

Page: 128 / 146

Appendix C: Installation
C- 2
AVG1 Analog Video Generator User Manual
Module Installation
A T-10 torx tip screwdriver is the only tool you need to install the module. A
T-10 torx tip is supplied with the module.
To install the module into the TG 2000 Platform mainframe, perform these steps:
1.
Set the TG 2000 Platform mainframe rear-panel power switch to off.
2. Unplug the power cord.
3.
Select the slot you will use to install the module. Table 2--1 lists the slot
restrictions. Figure C--1 shows a sample configuration with slot numbers.
Table C- 1: Module slot assignments
Module Slots in which the module can be installed
AGL1 Genlock module Slot 2 or 3
AVG1 Generator module Slots 2 through 10
AWVG1 Generator module Slots 2 through 10
BG1 Generator module Slot 2 through 10
Clock module Slot 1
CPU module Slot 11
DVG1 Generator module Slots 2 through 10
GP1 GPIB Interface module Slot 10
GPIB
Module
AGL1
Module
11 10 9 8 7 6 5 4 3 2 1
CPU
Module
AVG1
Module
DVG1
Module
AWVG1
Module
Clock
Module
BG1
Module
Power
Supply
Figure C- 1: TG 2000 Platform mainframe rear panel, showing slot numbering
Hardware Installation