Tektronix 2252, Operator'S Manual, Page: 99 / 114

Operators Familiarization
The descriptions of the readout locations and menu items are from top to
bottom as follows:
Active M easurem ent—indicates the name of the active measurement
and the measurement value (top line of readout},
U p-A rrow Button (t) — Recalls front-panel settings for the next record
in the current sequence. If the current record is the last in the sequence
(status END or the highest numbered record stored), the next record
recalled will be the first record of the current sequence. A sequence
starts with either 01 or the first record past a previous record with an END
SEQ status.
xx —Recalls the currently displayed record number {xx}. The record
number will start at 01 when the RECALL ONLY menu is displayed by
pressing theSTORE/RECALLSETUP button. If the menu is displayed by
selecting SEQUENCE from the Store/Recali, the record number will start
at the same number as displayed on the Store/Recali Setup menu.
D o w n -A rro w Button
(I)-R e c a lls the front-panel settings for the
previous record in the current sequence. If the displayed record is the
first in a sequence, pressing the down-arrow button wilt recall the current
record.
N E X T SEQ
— Changes the current record number to the first step of the
next sequence. If presently in the last sequence, pressing NEXT SEQ will
change the current record number to 01. This item will not appear if there
is only one sequence defined.
A ctive Front Panel S ettin g s
—indicates the VOLTS/DIV and SEC/DIV
settings for the currently active setup (bottom Sine of readout).
Store/Recali Setup Menu
To configure the oscilloscope to access the full features of the Store/Recali
Setup menu when the STORE/RECALL SETUP button is pressed, perform
the following procedure:
1. Press the top and bottom Menu-Seiect buttons to display the SERVICE
MENU.
3-43
2252 Operators