Tektronix 2252, Operator'S Manual, Page: 96 / 114

Operators Familiarization
There are three different configurations that may be selected to permit dif­
ferent accesses to the STORE/RECALL SETUP features. The first is the
Recall Only menu for use after the setups have been installed and no further
changes are to be routinely made.
The Recall Only menu lets you recall the test sequences to perform a series of
repetitive tests. Only the name and number of the stored record are displayed
along with up and down arrows for selecting higher or lower numbered set­
ups in a test sequence. If more than one sequence of setups is stored, a menu
item {NEXT SEQ) also appears which allows you to change sequences. See
the Recall Only Menu discussion.
When configured for full access to the STORE/RECALL SETUP feature,
stored setups can be recalled, altered, deleted, or arranged in sequences.
This configuration is used when first Installing the setups and arranging the
sequences. The Store/Recall menu remains displayed after a selection Is
made so that it is convenient to use for making the initial front panel setups or
making extensive changes to existing setups.
The Store/Recall Setup menu with access to Recall Only operates the same
as the Store/Recall Setup menu except that the menu display is cleared when
the STORE or RECALL item is selected. The first choice in the menu when
configured in this manner is SEQUENCE, and, when selected, accesses the
Recall Only menu for sequencing the setups. This configuration is useful for
making minor changes to existing setups before beginning a measurement
series.
Factory Stored Setups
When the 2252 Is shipped from the factory, the Store/Recali Setup memory
contains eight stored front-panel setups. These factory setups are stored in
setup locations 01 through 08. The setups may be recalled and used for
demonstration and training, or they may be used as a basis for setups which
suit your specific applications. Appendix A lists the front-panel settings for
each factory setup. The factory stored setups can be restored to the Store/
Recall Setup memory if desired. See Service Menu Features, internal
Settings Menu, LOAD STORE/RECALL SETUPS In this section.
NOTE
Restoring the factory-stored setups to the STORE/RECALL
memories erases any user-added setups. A warning message to
this effect is displayed when the feature is used.
3-40
2252 Operators