Tektronix 2213, Instruction Manual

Page: 7 / 225

2213 Service
OPERATORS SAFETY SUMMARY
The general safety inform ation in this p a rt o f the summary is fo r both operating and servicing personnel. Specific warnings
and cautions w ill be found throughout the manual where they apply and do n o t appear in this summary.
Terms in This Manual
CAUTION statements identify conditions o r practices
that could result in damage to the equipment or other
property.
WARNING statements identify conditions o r practices
that could result in personal injury or loss o f life.
Grounding the Product
This product is grounded through the grounding conductor
o f the power cord. To avoid electrical shock, plug the
power cord into a properly wired receptable before con­
necting to the product input or o utp ut terminals. A
protective ground connection by way o f the grounding
conductor in the power cord is essential fo r safe operation.
Terms as Marked on Equipment
CAUTION indicates a personal injury hazard not imme­
diately accessible as one reads the markings, or a hazard to
property, including the equipment itself.
DANGER indicates a personal injury hazard immediately
accessible as one reads the marking.
Danger Arising From Loss of Ground
Upon loss o f the protective-ground connection, all acces­
sible conductive parts (including knobs and controls that
may appear to be insulating) can render an electric shock.
Symbols in This Manual
This symbol indicates where applicable
A
cautionary or other information is to be
found. For maximum input voltages, see
Table 1-1.
Symbols as Marked on Equipment
DANGER — High voltage.
Protective ground (earth) terminal.
ATTENTIO N — Refer to manual.
Power Source
This product is intended to operate from a power source
that does not apply more than 250 volts rms between the
supply conductors or between either supply conductor and
ground. A protective ground connection by way o f the
grounding conductor in the power cord is essential fo r safe
operation.
Use the Proper Power Cord
Use only the power cord and connector specified fo r
your product.
Use only a power cord that is in good condition.
For detailed information on power cords and connectors
see Figure 2-1.
Use the Proper Fuse
To avoid fire hazard, use only a fuse o f the correct type,
voltage rating and current rating as specified in the parts
list fo r your product.
Do Not Operate in Explosive Atmospheres
To avoid explosion, do not operate this product in an
explosive atmosphere unless it has been specifically cer­
tifie d fo r such operation.
Do Not Remove Covers or Panels
To avoid personal injury, do not remove the product
covers or panels. Do not operate the product w itho ut the
covers and panels properly installed.
Vi @