Technology Solutions
Instruction Manual
Tek-Cor 1100A
www.tek-trol.com
4
1
Safety Instructions
1.1
Intended Use
This measuring device is intended to measure the mass flow rate. At the same time, the
system also measures fluid density and fluid temperature. These parameters are then
used to calculate other variables such as volumetric flow.
1.2
Certification
Tek-Cor 1100A has UL, CE, NTEP, and HMO certifications.
1.3
Safety Instructions from the Manufacturer
1.3.1
Disclaimer
The manufacturer will not be held accountable for any damage that happens by using
its product, including, but not limited to direct, indirect, or incidental and
consequential damages.
Any product purchased from the manufacturer is warranted in accordance with the
relevant product documentation and our Terms and Conditions of Sale.
The manufacturer has the right to modify the content of this document, including the
disclaimer, at any time for any reason without prior notice, and will not be answerable
in any way for the possible consequence of such changes.
1.3.2
Product Liability and Warranty
The operator shall bear authority for the suitability of the device for the specific
application. The manufacturer accepts no liability for the consequences of misuse by
the operator. Wrong installation or operation of the devices (systems) will cause the
warranty to be void. The respective Terms and Conditions of Sale, which forms the
basis for the sales contract shall also apply.
1.3.3
Information Concerning the Documentation
To prevent any injury to the operator or damage to the device it is essential to read
the information in this document and the applicable national standard safety
instructions. This operating manual contain all the information that is required in
various stages, such as product identification, incoming acceptance and storage,
mounting, connection, operation and commissioning, troubleshooting, maintenance,
and disposal.
1.4
Safety Precautions
You must read these instructions carefully prior to installing and commissioning the
device. These instructions are an important part of the product and must be kept for
future reference. Only by observing these instructions, optimum protection of both
personnel and the environment, as well as safe and fault-free operation of the device
can be ensured.
