Technology Solutions
Instruction Manual
Tek-Cor 1100A
www.tek-trol.com
29
No.
Notes
1
E key: enter
2
key: move cursor or return
3
key: Page down
4
Light indication for working status
5
Two line LED display
Key
Measurement State
Menu State
Function State
Data State
E
Show the Measure-
ment Results and
State on Page1/2/3.
Page Down to Menu
State.
Next Menu
Select Function
•
Change
Number
•
Change Unit
•
Change
Character
Return to the Previous
Screen
Return to the
Upper-Level Menu.
Press this Key
to Return to the
Measurement
State
Select Function
Move the Cursor
to the Right
Enter the Menu
Confirm and Save
the Function
Save the Input,
then Go Back to
the Function
Menu
NOTE
•
Operation point of the photoelectric key is located right behind the glass panel.
•
It is better to operate the photoelectric key in vertical direction, rather than
horizontal direction.
5.2
Configuration Parameter
Review or set the configuration parameters according to the following indications
(Press
to go to the next page and press
to move the position of cursor)
WARNING
