Technology Solutions
Instruction Manual
Tek-Cor 1100A
www.tek-trol.com
9
2.2
Models
The Tek-Cor 1100A Series Coriolis Mass Flow Meters are available in the following six
configurations:
2.2.1
U-Tube
These flow meters are comprised of two U-Tubes, a
magnet and coil assembly, and sensors at the inlet and
outlet of the tubes. Coriolis forces exerted by the flowing
medium are used to determine the mass flow rate and
density of the medium.
2.2.2
Standard
These flow meters are comprised of two U-shaped tubes in
a casing with a considerably smaller radius than the
conventional U-Shaped Coriolis flow meters. The smaller
radius ensures a more compact instrument with
significantly lower pressure differential values compared
to other flow meters.
2.2.3
Nano
These flow meters are the most compact in our range of
Coriolis Mass Flow Meters, designed specifically to provide
optimum performance in low-flow applications. It
comprises a single flow tube which is considerably smaller
in size than the conventional U-Shaped flow meters.
2.2.4
Super Bend
The Super Bend coriolis mass flow meter is used in a wide
range of applications to accurately measure the flow
media. It consists of a loop-powered dual tube system,
capable of withstanding pressures of up to 1450 psi. It is
also more cost-efficient compared to conventional flow
meters.
Super Bend (Size 3/8” to 8”)
U-Tube sensor (Size 1” to 8”)
Standard sensor (size 3/8” to 8”)
Nano sensor (Size 3/8” to 1”)
