Technology Solutions
Instruction Manual
Tek-Cor 1100A
www.tek-trol.com
22
Avoid direct installation at the sensor side as this can cause measurement errors.
For installing 6” or larger size flow meter, support the sensors using the rubber
connectors as the buffer.
3.2.3
Flow Direction
The flow arrow in front of the flow meter indicates the direction of flow, so install the
Tek-Cor 1100A accordingly. Otherwise, the transmitter may not display the mass flow
accurately. If the process medium is liquid or slurry, the flow direction is down-to-up;
if the process medium is gas, the flow direction can be either down-to-up or up-to-
down.
buffer
