FCC and IC Statements
IL948 Tek-CARE
®
500 & Tek-CARE
®
550 Installation Manual • vii
Copyright © TekTone Sound & Signal Mfg., Inc. All Rights Reserved.
transmitter should only be used or installed at locations where there is at least 20cm
separation distance between the antenna and all persons.
TekTone
®
Responsibilities to comply with FCC and Industry Canada Regulations
The TekTone
®
PM550 Wireless Radio Module has been certified for integration into
products only by TekTone
®
under the following conditions:
1. The antenna(s) must be installed such that a minimum separation distance of
20cm is maintained between the radiator (antenna) and all persons at all times.
2. The transmitter module must not be co-located or operating in conjunction with
any other antenna or transmitter.
As long as the two conditions above are met, further transmitter testing will not be
required. However, TekTone
®
is still responsible for testing their end-product for any
additional compliance requirements required with this module installed (for example,
digital device emissions, PC peripheral requirements, etc.).
IMPORTANT NOTE:
In the event that these conditions cannot be met (for certain
configurations or co-location with another transmitter), then the FCC and Industry
Canada authorizations are no longer considered valid and the FCC ID and IC Certification
Number cannot be used on the final product. In these circumstances, TekTone
®
will be
responsible for re-evaluating the end product (including the transmitter) and obtaining
a separate FCC and Industry Canada authorization.
End Product Labeling
The TekTone
®
PM550 Wireless Radio Module is labeled with its own FCC ID and IC
Certification Number. If the FCC ID and IC Certification Number are not visible when
the module is installed inside another device, then the outside of the device into which
the module is installed must also display a label referring to the enclosed module. In
that case, the final end product must be labeled in a visible area with the following:
Contains Transmitter Module FCC ID: QZ8-PM550
Contains Transmitter Module IC: 1720A-PM550
–or–
Contains FCC ID: QZ8-PM550
Contains IC: 1720A-PM550
TekTone
®
must only use quarter wave monopole or PCB inserted antennas which have
been certified for use with the TekTone
®
PM550 Wireless Radio Module,
TekTone
®
must not to provide information to the end user regarding how to install
or remove this RF module or change RF related parameters in the user manual of the
end product.
The user manual for the end product must include the following information in a
prominent location:
“To comply with FCC and Industry Canada RF radiation exposure limits for general
population, the antenna(s) used for this transmitter must be installed such that a
minimum separation distance of 20cm is maintained between the radiator (antenna)
and all persons at all times and must not be co-located or operating in conjunction
with any other antenna or transmitter.”
Canada
TekTone
®
Model: SF551 Pendant Transmitter
