System Installation and Setup
click
Delete
.
4. To add a new staff entry, click
Add
in the
Staff Types
pane and type a name in
the
Details
pane below, then click
Apply
to accept the changes.
Create Shifts
Shifts are used to schedule time periods when central monitoring is enabled, when
supervision of a transmitter is disabled, or when specific pagers annunciate calls.
Now, create Shifts:
1. Click on
Assignments
in the page selection pane of the Config Tool.
2. Click on the
Add
button in the
Shifts
area.
3. In the
Shift Details
area, type a name for the shift describing what the shift is
to be used for.
4. Using 24-hour time, enter a
Start Time
and an
End Time
in the
Shift Details
area. (Midnight is 00:00.) Start and End times must be at least 10 minutes apart.
5. Use the checkboxes to select which days of the week this event is scheduled.
6. Click on the
Apply
button.
Note:
A single time period cannot cross midnight into the next day. Divide it into two
time period entries. For example, create these two entries to create a scheduled time
period of 6:00 PM Friday to 10:00 AM Saturday:
Begin—18:00 End—23:59 Day—Friday
Begin—00:00 End—10:00 Day—Saturday
Select
File>Save Configuration
to save your programming changes.
24 • IL948 Tek-CARE
®
500 & Tek-CARE
®
550 Installation Manual
Copyright © TekTone Sound & Signal Mfg., Inc. All Rights Reserved.
