2. HARDWARE SETUP
TR-824 User’s Manual
9
2.3 Installing Hard Drives
The TR-824 Controller card supports up to four Serial ATA hard drives. Install all of the hard drives into
the hard drive bays of your system, including their power cables.
Attach one Serial ATA data cable to each hard drive. Then attach the other ends of the cables to one of the
Serial ATA ports on the TR-824 card. All of the connectors are keyed so they
can only be attached one
way.
Note: The TR-824 Controller card is a PCI Plug-n-Play (PnP) device. No changes are necessary in
the Motherboard CMOS Setup for resources or drive types in most applications.
