5. INSTALLING SOFTWARE DRIVERS)
TR-824 User’s Manual
17
Next
.
10. Choose
Specify Location
then type
“A:\tr824.inf”
in the text box.
11. Insert the TR-824 driver diskette into the A:\ drive.
12. Click the
Next
button. A message informing you
“Windows 98 has found Tekram TR-824
SATARaid Controller”
should appear.
13. Click
Next
, then
Finish
.
14. When asked if you want to restart your computer, click
Yes
. Immediately remove the diskette from
drive A:\.
5.5.2 Existing Windows 98 Installation
The following section details the installation of TR-824 drivers on a system that has Windows 98 already
installed and running.
1. After installing the TR-824 controller card and configuring the hard drives, power up the system and
boot Windows.
2. The
Add New Hardware Wizard
will appear, informing you that it has found a PCI Mass Storage
Controller.
3. Click
Next
. From the generated list box, choose
Search for best driver for your device (Recommended)
.
4. Insert the TR-824 driver diskette in drive A:\.
5. Click
Next
. From the generated choices, choose
Specify a location
.
6. Type
“A:\tr824.inf”
in the text box that appears.
7. Click
Next
. A message informing you that
“Windows 98 has found Tekram TR-824 SATARaid
Controller”
should appear.
8. Click
Next
, then click
Finish
.
9. Click
Yes
when asked if you want to restart your computer. Be sure to eject the diskette from drive A:\.
5.5.3 Confirming Driver Installation in Windows 98
To confirm that the driver has been properly loaded in Windows 98, perform the following steps:
1.
Choose
Settings
from the
Start
menu.
2.
Choose
Control Panel,
then double-click the
System
icon.
3.
Choose the
Device Manager
tab, then click the
“+”
in front of
SCSI controllers
.
“Tekram TR-824
SATARaid Controller”
should appear.
