5. INSTALLING SOFTWARE DRIVERS
TR-824 User’s Manual
13
5. INSTALLING SOFTWARE DRIVERS
5.1
Windows Server 2003 Installation
5.1.1 New Windows Server 2003 Installation
The following details the installation of the TR-824 drivers while Installing Windows 2003.
1. Start the installation:
• Floppy Install: Boot the computer with the Windows Server 2003 installation diskettes.
• CD-ROM Install: Boot from the CD-ROM. Press
<F6>
when the message
“Press F6 if you need to
install third party SCSI or RAID driver”
appears.
2. When the
Windows Server 2003 Setup
window is generated, press
<S>
to specify an Additional
Device(s)
3. Insert the TR-824 driver diskette into drive A:\ and press
<Enter>
.
4. Choose
Tekram TR-824 SATARaid Controller for Windows XP/ Server 2003
from the list that
appears on screen, and then press
<Enter>
.
5. The Windows Server 2003 Setup screen will appear
“Setup will load support for the following mass
storage devices:”
. The list will include
Tekram TR-824 SATARaid Controller for Windows XP/
Server 2003.
NOTE: If there are any additional devices to be installed, specify them now. When all devices are
specified, continue to the next step.
7. From the Windows Server 2003 Setup screen, press
<Enter>
. Setup will now load all device files and
then continue the Windows Server 2003 installation.
5.1.2 Existing Windows Server 2003 Installation
After installing the TR-824 card and rebooting your system, Windows Server 2003 setup will show a
Found New Hardware
dialog box. Under Windows Server 2003,
“RAID Controller”
will be displayed.
1. Insert the TR-824 driver diskette into the drive A:\.
2. Choose
i
nstall from a list or specific location
and specify to
search removable media
then press
<Enter>
.
3. Choose
Tekram TR-824 SATARaid Controller
from the list that appears on screen, and then press the
<Enter>
key.
4. If using a driver that has not been digitally signed by Microsoft, you will be asked if you want to
continue the installation. Click
Continue
.
5. When the New Hardware Wizard
has finished installing the TR-824 software, click
Finish
.
5.1.3 Confirming Windows Server 2003 Driver Installation
1. Right-click the
My Computer
icon and select
Manage
from the popup menu.
2. Click
Device Manager
in the menu tree.
3. Click the
“+”
in front of
SCSI controllers
.
“Tekram TR-824 SATARaid Controller
” should appear.
5.2 Windows XP Installation
5.1.1 New Windows XP Installation
The following details the installation of the TR-824 drivers while Installing Windows XP.
1. Start the installation:
• Floppy Install: Boot the computer with the Windows XP installation diskettes.
• CD-ROM Install: Boot from the CD-ROM. Press
<F6>
when the message
“Press
F6 if you need to
install third party SCSI or RAID driver”
appears.
2. When the
Windows XP Setup
window is generated, press
<S>
to specify an Additional Device(s)
3. Insert the TR-824 driver diskette into drive A:\ and press
<Enter>
.
4. Choose
Tekram TR-824 SATARaid Controller for Windows XP/ Server 2003
from the list that
appears on screen, and then press
<Enter>
.
5. The Windows XP Setup screen will appear
“Setup will load support for the following mass storage
devices:”
. The list will include
Tekram TR-824 SATARaid Controller for Windows XP/ Server
2003.
NOTE: If there are any additional devices to be installed, specify them now. When all devices are
