5. INSTALLING SOFTWARE DRIVERS
TR-824 User’s Manual
16
appears on screen then press
<Enter>
.
6. The
Windows NT Setup
window will appear again saying,
“Setup will load support for the following
mass storage devices:”
The list will include
TR-824 SATARaid Controller for Windows NT 4.0 and
2000
NOTE: If there are any additional devices to be installed, specify them now. When all devices are
specified, continue to the next step.
7. From the Windows NT Setup screen, press
<Enter>
. Setup will now load all device files and then
continue the Windows NT installation.
8. After a successful installation, the
SCSI Adapter Setup
box will show that
“the Tekram TR-824
SATARaid Controller driver has been installed”
.
5.4.2 Existing Windows NT4.0 Installation
The following section details the installation of TR-824 drivers on a system that has Windows NT4.0
already installed and running.
NOTE: Do not attach the boot drive or any other hard drive to the TR-824 controller card before
completing this step.
1. From the
Start
menu, choose
Settings
.
2. From the
Settings
menu, choose
Control Panel
.
3. Double-click the
SCSI Adapters
icon. The
SCSI Adapters
dialog box appears.
4. Choose
Drivers
then click
Add
.
5. In the
Install Drivers
dialog box, click
Have Disk…
.
6. When
Install From Disk
appears, insert the TR-824 driver diskette in drive A:\.
7.
Type
“
A:\tr824
.inf”
in the text box window then click
OK
.
8. When the
Install Driver
dialog box appears, select
Tekram TR-824 SATARaid Controller
then click
OK
.
9. When the
Select SCSI Adapter Option
dialog box appears, click
Install
.
10. After a successful installation, the
SCSI Adapter Setup
box will show that
“the Tekram TR-824
SATARaid Controller
has been installed”
.
11. Power off your system.
12. If you plan to move the boot drive to the TR-824 card, connect the boot drive to the card now. Then
power on your system.
5.4.3 Removing the Driver from Windows NT4.0
1.
From
Start
, choose
Setup
then choose
Control Panel
.
2.
In
Control Panel
, choose
SCSI Adapter
then choose
Drivers
.
3.
Click
Remove
.
4.
After successful removal, the
SCSI Adapter Setup
box will show that
“the Tekram TR-824
SATARaid Controller
has been removed”
.
5.5 Windows 98 Installation
5.5.1 New Windows 98 Installation
The following section details the installation of the TR-824 drivers while installing Windows 98.
1. Install the TR-824 controller card and configure the hard drive(s), partition and format your hard
drive(s), if necessary.
2. Install Windows 98 normally.
3. After installation, generate the
Start
menu and choose
Settings
.
4. From the
Settings
menu, choose
Control Panel
.
5. In the
Control Panel
window, double-click the
System
icon.
6. In the
System
window, choose the
Device Manager
tab.
7. In the hierarchical display under Other Device is a listing for
PCI RAID Controller
. Select it then click
the
Properties
button.
8. Choose the
Driver
tab in the
Properties
window, choose
Update Driver
then click
Next
.
9.Choose
Search for a better driver than the one your device is using now (recommended)
, then click
