30
5) Remove the keypad, drill a hole for the locking screw.
6) Hang up the keypad. Tighten the locking screw.
7) Replace the battery compartment cover, tighten 2 screws.
8) Close the keyboard cover if necessary.
8.5
When installation is complete,
optimize
the route and
check communication
quality
by following the instructions in
Paragraph
7.5
of the operating manual.
9 Maintenance
In order to ensure reliable operation of the keypad,
testing
and
maintenance
of the keypad
at
least once per month
is recommended as follows:
- verify keypad housing integrity and purge it from contamination;
- ensure reliability of its mounting;
-
verify keypad operability.
10 Labeling
The following information is marked on the label attached to the keypad housing:
- manufacturer trademark;
- abbreviated keypad designation;
- firmware version;
- month and year (last two digits) of manufacture;
- conformity mark (if certificate is available);
- bar-code that duplicates textual information.
11 Recycling
11.1
The keypad poses no threat to human life and to the environment. On expiry of its lifetime
recycling is done without taking special measures to protect the environment.
11.2
Recycle battery cells by giving spent battery cells to a trade organization, service center,
equipment manufacturer, or organization that accepts spent batteries
.
