26
7.4.5
«9.Date setting
» and
«10.Time setting
» menu items.
Terms of use:
Time adjustment from keypad menu is available when control panel operates
without computer control. Checking and manual adjustment of the time is
recommended at least
once
a week.
In case the control panel is connected to the computer with running MSS
Core,
and communication between the
Core
and the control panel is established, the
date/time correction is not possible. The control panel syncs own calendar and clock
with a computer calendar and clock with the use of the Core once an hour. In case time
divergence is more than 1 minute, it is recorded to the event log.
At an attempt to adjust the time via keypad the following message is displayed:
7.5 Engineer Menu
7.5.1
After
authorization
(Paragraph
7.1
),
information
displayed
in
«1.Sys.dev.status»
,
«2.Wls.dev.status»
menu items are similar to those described in
paragraphs
7.4.2
,
7.4.3
for
Technician menu
.
7.5.2
Information displayed in
«3.Part.status»
,
«4.Failures»
menu items depends
on the rights established for the
Engineer
PIN code. An
Engineer
assumes the highest
privileges in system setup, but no rights in system control (arming/disarming partitions,
etc.), so system control tactics configuration in
«
Identifiers
» task of MSS
Setup
Module
is not permitted for an engineer.
But to provide status view of partitions, they must have assignments. Otherwise, the
following messages are displayed:
7.5.3
Actions in
«
5.Event log
», «
6.Keypad
», «
7.Date setting
» and «
8.Time
setting
» menu items are similar to those described for
User
/
Operator
/
Technician
menu.
Part. status
1. View all
Part. status
2.By part.number
Failures
1. By part. number
View all
No avail.part.
Select part.
No avail.part.
Select part.
No avail.part.
Not executed
Forbidden
