28
7.5.5
«3.Test»
sub-item of the
«6.Keypad»
menu item serves for keypad general
testing before it`s commissioning,
prior to registering
in wireless network.
«1.Tst.sleep mode»
̶
by pressing the
OK
button the display is switched OFF,
followed by switching ON when pressed again.
«2.Test RF»
̶
switching the transmitter to continuous generation mode with
technological parameters (important for verification at the factory).
«3.Test keypad»
̶
pressing
OK
is followed by the screen:
in which pressing of any button is followed by darkening of the corresponding symbol
on the screen (for example,
«1», «2», «3», «4», «5» pressed).
«4.Test backlight»
̶
upon pressing
ОК
a screen with options to switch backlight
ON/OFF with the use of
▼, ▲ buttons is appeared.
«5.Test buzzer»
̶
upon pressing
ОК
a screen with options to switch buzzer
ON/OFF with the use of
▼, ▲ buttons is appeared.
«6. Status test»
̶
upon pressing
ОК
the following screen is appeared:
On the
second line
, the
3
items show abbreviations with the following meanings:
Availability and residual capacity status is provided only with installation of both or one
main (Primary) battery. Then after activation it may vary to discharge side only. When
The 1-st item
TMP
Battery compartment is tampered or
detach button is released (keypad is
detached
from
the
installation
surface)
NOR
Battery
compartment
is
closed,
detach button is pressed (keypad is
fastened on the installation surface)
The
2-nd
item for main battery,
The
3-rd
item for backup battery
NOR
BAT in normal status
BAT
BAT discharged
NO
BAT is absent
123456789*0#
-
ОК-С▼▲F1F2F3F4
Status test
NOR NOR NOR
