14
In case the partition is
not
ready
to be armed,
press «
#
» button to view the reasons,
scrolling of which is provided by pressing
▼
,
▲
buttons
:
Where:
«
MC
»– type of the device that caused the
«not ready»
status of the partition (here is
magnetic contact door opening detector);
«
0011/1
»– ES address (0011 is the number in the list of wireless or hardwired devices,
1 is the number of the device detection channel (here, magnet-steered contact);
«
Р:007
– partition number;
«
alarm
»– event type.
In case the partition is not ready to be armed, the
reason
for that must be
eliminated
.
Otherwise it is possible to arm the partition bypassing faulty event sources, if it is
allowed for this partition while system setup. Bypass rules are described in
«Partitions»
task of
MSS
Setup module.
WARNING!
Arming with bypass leads to a partial loss of control of the protected object, and
is not recommended as a measure for permanent use!
Pressing the
OK
button on the selected partition displays the following screen:
On the second line select the required action for the partition by pressing
▼ and ▲
buttons. The list of possible actions for the partition is determined by the control tactics
allowed in the settings for the
User
PIN code, entered during authorization.
Full list of possible actions:
1. Arm
2. Arm with bypass
3. Disarm
4. Rearm
Р007 Ready
1. Arm
MC
0011/1 Р: 007
Alarm
