9
At that, the display is functional only; the keypad itself does not communicate with the
control panel.
If an
event or failure
occurs, the first one in succession is shown. For example:
The
«
–
» buttons to the left and right of the
OK
button switch to a second screen for
detailed messages. For example:
The following informational priorities are considered when displaying status:
1
Fire
7
Exit delay
2
Warning! Fire danger
8
Sabotage
3
Alarm
9
Critical failure
4
Violation
10
Service required
5
Test
11
Standby
6
Entry delay
In order to view
the next event on the display, respond to the previous event using any
accessible method: by disarming partition, removing the cause of violations, sabotage
or failure.
Displaying events on the screen is self-explanatory.
6.7
The keypad ensures transmission of information from the control panel using a
temporary
buffer
. If the buffer needs to be filled (e.g. when viewing log events), the
keypad automatically communicates with the control panel, and the following message
is displayed:
In progress
▓▓▓▓
Standby
21 feb 16:53
Alarm part. 002
24 feb 13:16
Alarm IR0003/1
24 feb 13:16:01
