Teknoware TKT6716C, Installation And Maintenance Instructions Manual

Page: 4 / 56

VOT 2; Rev 1.2; EN; 09.07.2013
TKT67C
– Installation and maintenance
4
1. Safety instructions
Read before installing the product.
This manual contains important information that must be followed during the installation and maintenance of
the central battery unit and the batteries. Installation of this device is allowed only to a person who has the
required permissions and qualifications.
National regulations for electric installations and building codes must be observed in the placing of the central
battery unit.
In the installation of batteries, constituted regulations must be observed.
WARNING
There is always dangerous voltage level in the output circuits and inside the central battery unit if
the central battery unit is switched ON. Chancing the main switch to 0
–position will NOT make
the central battery unit de-energized. The central battery unit and the battery housing can be
opened only by electrically skilled person.
Device must be made de-energized before any maintenance or repair work. Remove the battery
fuses and set the main switch to OFF position.
2. Package contents and storing
2.1 Contents of package
The package contains a central battery unit of TKT67XXC series.

Store the package sheltered from the rain.

Do not place anything on top of the package.
NOTE: The package may contain sealed lead acid batteries that contain large quantities of energy and
may short circuit, if stored inappropriately. This must be considered when storing the package.
2.2 Storing
If you do not install the unit and batteries immediately, note the following:

Store the unit in a dry place, protected from humidity.

Store the unit and the batteries in the recommended storing temperature of +10
…+30

C.

If the batteries are stored for a longer period of time, they must be recharged every 6 months
for at least 12 hours at a time.