Teknor Industrial Computers TEK-AT4LVG, Technical Reference Manual

Page: 146 / 205

VFLASH Software 12-25
ERROR NUMBER DESCRIPTION
(HEX) (DECIMAL)
1C 28 Flash content does not verify with source
1D 29 No device found in specified starting socket
1E 30 Cannot create a Flash disk of specified size
1F 31 Communication error when reading Flash identification
code
20 32 Cannot use 8086 or 8088 CPU with Flash memory
21 33 No serial port or card attached for transfer
22 34 /S switch not supported with this BIOS
23 35 /G:group value on command line is invalid
24 36 Insufficient Flash or EPROM space to include the volume
label entry
25 37 Cannot make EPROM with same [source] and
[destination] path
26 38 EPROM filename already exist
27 39 EPROM filename path not found
28 40 Selected drive for EPROM files not ready
29 41 Invalid EPROM filename or disk error
2A 42 Not enough disk space to copy EPROM files
2B 43 Not enough memory for data buffer
2C 44 Command line option "/TEKXXX" is invalid
2D 45 486SLC internal registers are different from BIOS setup
2E 46 The 486SLC cache is not disabled over the Flash device(s)
2F 47 Unable to erase the nth device
30 48 No VIPer BIOS found
31 49 The source diskette must be DOS Version 4 and up
32 50 Flash ID command to BIOS or data Flash must be issued
first