Tekno RC NB48.4, Building Instructions

Page: 24 / 32

TKR1343
M4x10mm Flat Head Screw
X5
TKR1603
M5x4mm Set Screw
x1
TKR1524
M3x12mm Cap Head Screw
x1
Bag R
Engine / Pipe
Installation
Step
R-1
Step
R-2
Step
R-3
TKR5323
TKR1525
TKR1524
TKR1343
TKR1343
TKR1228
TKR1228
TKR1525
TKR1603
TKR5321
TKR5321
Set Screw
(not included)
*You may need to bend the pipe wire hanger forward
or backward depending on your particular pipe.
VERY IMPORTANT - With the set screws that secure the
pipe hanger wire set loose, install pipe onto pipe hanger
wire. Adjust the wire such that the pipe and the manifold
connections from the engine are not bent or angled. The
pipe must fit naturally. You may need to bend the pipe
hanger wire to accomplish this. Then tighten the set
screw that secures the wire to the wire hanger block. The
wire must then be cut flush to the wire hanger block so it
will not interfere with the fuel tank. If the wire is not flush
with the block, you may risk puncturing your fuel tank.
! ! !
Thread
Lock
Thread
Lock
Thread
Lock
Thread
Lock
Thread
Lock
TKR1525
M3x14mm Cap Head Screw
x4
24