Tekno RC NB48.4, Building Instructions

Page: 21 / 32

Electronics (not included)
Note: We recommend
using a servo with at
least 300 oz/in torque.
Screws (not included)
TKR1401
TKR1401
TKR1401
TKR1525
TKR1525
TKR1401
TKR5317
Switch (not included)
Electronics (not included)
Note: We recommend using
a piece of thin foam or other
type of padding under the
battery to reduce shock.
Likewise, we suggest either
using a couple layers of 2-sided
tape under the receiver or
simply use another piece of
foam and let the receiver ‘float’
in the box. The servo wires will
help keep the receiver in place
and provide shock protection.
RED = Switch / YELLOW = Brake Servo / BLUE = Steering Servo
Wire Routing Diagram
Electronics (not included)
TKR1525
TKR1401
M3x6mm Button Head Screw
x13
TKR1525
M3x14mm Cap Head Screw
x8
TKR1221
M3X8mm Washer
x8
TKR1221
TKR1221
TKR1221
Step
P-3
Step
P-2
Step
P-1
TKR1601
M3x4mm Set Screw
x6
Antenna tube installation
Bag P
RX Tray Mud Guard
21