Tekno RC NB48.4, Building Instructions

Page: 13 / 32

TKR8087
TKR8041
TKR8042
TKRBB08165
TKR8194A
TKR8034
TKR1201
TKR5165
TKR1601
TKR1201
TKRBB05104
TKR1601
TKR1601
TKRBB13194
TKR1221
TKR1401
TKR8042
TKRBB05104
Step
J-1
Step
J-3
Step
J-2
TKR5071
TKR1603
(Option)
*TKR5071B
*TKR5071C
*TKR5071X
TKR1603
M5x4mm Set Screw
x2
TKRBB13194
Ball Bearing (13x19x4)
x2
TKRBB08165
Ball Bearing (8x16x5)
x2
TKR5071
M3x16.8mm Pin
x2
TKR1601
M3x4mm Set Screw
x8
TKR1401
M3x6mm Button Head Screw
x2
DO NOT SKIP THIS STEP!
Note: The TKR1601 set screws are meant to keep the TKR8042 screws from coming loose. After installing TKR8042
and ensuring the steering action is free, install TKR1601 in the locations indicated. Very slowly tighten the screws
until you feel some resistance from contacting the TKR8042 screws. DO NOT OVERTIGHTEN. Also be sure to loosen
TKR1601 before unscrewing TKR8042 or you will damage the screws and the parts.
Thread
Lock
TKRBB05104
Ball Bearing (5x10x4)
x4
Bag J
Front Spindle / CVA Assembly
13
Note: The TKR1601 set screws are meant to keep the TKR8034 hinge pin from
rotating. After installing TKR8034, install the TKR1601in the locations indicated.
Very slowly tighten the screws until you feel some resistance from contacting
the TKR8034 hinge pin. DO NOT OVERTIGHTEN. Also be sure to loosen
TKR1601 before removing TKR8034 or you will damage the hinge pin.
Note: Notch on pin
needs to line up
with set screw.
TKR1221
M3x8mm Washer
x2
Note: The steering stops provide adjustable
travel limiters to control overall steering throw.
We recommend 1 washer on each side.
With too much steering travel,
the rear end will lose traction around
corners, the vehicle will be very hard to drive
and it will be more prone to breaking parts.
TKR1201
M3 Locknut Black
x4