Tek Drive TDS-F8, Instruction Manual

Page: 55 / 74

53
3-2 Function Key Instruction
FUN. Key Title Function Description
Function/
Display Key
Used to display various status information cyclically of F8, such as
frequency command, output frequency, output current and parameter
group.
UP Key
(
＋
Key)
Increment key for function, parameter or set value.
DOWN Key
(
－
Key)
Decrement key for function, parameter or set value.
Data Enter Key
(Edit/ Write)
Selects mode, group, function or parameter. Displays each parameter’s
set value.
By depressing this key (after changing a parameter setting), the set value
is entered.
RUN Key
(Run Command)
When F8 is under drive mode and the Run command is by operator, the
RUN LED illuminates after depressing RUN key then F8 will start to run.
STOP/ Fault Reset
Key
When F8 is under drive mode and during in run, the STOP LED
illuminates after depressing STOP key then F8 will stop output. The
function of STOP key can be disabled/ enabled by setting of Parameter 2-
04 if F8 Run command is by remote (2-01≠0).
Reset F8 at fault by depress the RESET key.
◼
RUN and STOP Indicators
Fig. 3.2 RUN/ STOP LED and Drive Operation
*: RUN, STOP indicator consists three types status lit, flashing, and lit out, which are corresponding to the
operating conditions of F8.