Tek Drive TDS-F8, Instruction Manual

Page: 3 / 74

1
注 意 事 項 / Safety Instructions
首先非常感謝您採用東達無感測向量型高機能變頻器 TEK-DRIVE/ TDS-F8 系
列 ( 以下簡稱 TDS-F8) 。 TDS-F8 係採用最新之高品質半導體功率元件並融會電機電
子控制技術，製造而成之驅動器。
此變頻器簡易說明書提供 TDS-F8 變頻器的相關資訊。在使用 F8 之前，請您
仔細詳讀本說明書以確保在安裝、使用上與保養的正確性。此外，請妥善將其交
給最終使用者，並放置在明顯的地點以便隨時查閱。下列事項請務必遵守，如有
任何疑慮請上東達公司網頁
www. tekdrive.com.tw ，搜尋
TDS-F8 使用說明書
以便獲
得更詳細的說明。
Thank you for using TDS-F8 Compact Standard Inverter (drive, VFD) developed by TEK-DRIVE Co.,
Ltd., featuring High-Performance and ultra-low noise.
In the course of using, in case of any problems not covered by this Manual, please contact local agents
or engineering technical personnel from our company. Our professional staff is glad to serve you. Please
continue to use this product.
Read this instruction manual first before using the F8, the following additional information is as an
aid to avoid problem or injury in this manual, NOTES FOR SAFE OPERATION are classified as
“DANGER” or “CAUTION”. Always read these before continuing.
■ 禁止及注意警告事項 /
DANGER, WARNNING and ATTENTION
危險
DANGER
➢
實施配線工作之前，確認已關閉電源。
➢
輸入電源切離後，請勿隨即觸摸電路或更換零件，因此時驅動器內
部仍有高壓非常危險，需待變頻器之顯示燈熄滅。
➢
變頻器的輸出端子 U 、 V 及 W ，絕不可接錯接到 AC 電源側。
➢
絕不可以觸摸或自行改裝內部之零件及線路。
DANGER
➢
Disconnect AC input power before connecting any wiring to the AC motor drive.
➢ After switch off the mains supply, dangerous voltage can still be present in the VFD.
When opening the VFD for installing and/or commissioning activities wait at least 5
minutes to allow the buffer capacitor to discharge.
➢
Never connect the AC motor drive output terminals U/T1, V/T2 and W/T3 directly to
the AC mains circuit power supply.
➢
Never touch and/ or modify the internal wiring or components.