Tek Drive TDS-F8, Instruction Manual

Page: 42 / 74

40
1-2 Mounting & Installation
Do enhance the operation reliability and life time of F8, the F8 should be installed in an environment for temperature
increase free, such as in an enclosure or box.
Fig. 1.1 shows the minimum free space required around the F8 to guarantee adequate cooling.
(a) Free space Front View (b) Free space side view
Fig. 1.1 Free space for installation
1-3 Installing Location Condition Free
The F8 must be installed in a location free for.
⚫ Floating dust/ cotton dust/ metal power or any material into the F8.
⚫ Rain/ moisture or wet environment, direct sunlight (not for use outdoor).
⚫ Corrosive, combustible gases or liquid. oil spray, splashes or salty spray.
⚫ Physical shock or vibration, magnetic noise or radioactive substances.
F8 drive is suitable for operation in temperature range as -10
℃
~ +45
℃
, if F8s installed in an enclosure, be sure
the installation location for cooling effect, and use an external cooling fan or air condition in a suitable location to
maintain the internal temperature of enclosure as 45
℃
maximum.
1-4 Storage Condition
If the drive will be stored after receiving, place it in its original packaging and store according to following table.
Nominal Ambient Temperature -20°C ~ +60°C
Relative Humidity 0 to 90% RH, Non-Condensing
Atmospheric Pressure 86 ~ 106kPa
Storage Site Indoor, Location Free as Installing, store on a Shelf or Countertop