Tek Drive TDS-F8, Instruction Manual

Page: 54 / 74

52
3.
Operating via the Operator (Keypad)
3-1 LED Indicators, Display and Function Keys
The F8 has two operating mode, “DRIVE” and “PRGM” (PROGRAM). User can press the key to
switch mode between DRIVE and PRGM when F8 is at stopped status only. In the DRIVE mode, the F8
can be operated and run. Only in the PRGM mode, user can change the control and system parameters
of F8.
TDS-F8 has two types of digital operator:
1.
Local Operator (LOP) : located in the center of F8, it consists the LED indicators, display area and
function keys. Please see following Figure 3.1 .
2.
External Remote Operator (ROP) : It provides the remote function of the digital operator, which
is an optional accessory. When using an ROP, the control priority of F8 will be transferred to the
ROP automatically. At this time the LOP can only be monitored the operating status of F8, and can
neither set parameters nor control the operating.
◼
Outline of LOP
Fig. 3.1
Local Operator