Tegam 1830A, Instruction And Service Manual

Page: 45 / 66

10 TEGAM WAY • GENEVA, OHIO 44041 440-466- 6100 • FAX 440 -466- 6110 • www.tegam.com
4-29
Section IV – Operating Instructions
VOLT_ERR_PERCENT Max. Voltage Error
ZEROING_SERVO_LOOP
Status of ZEROSERVOLOOP
function
DO_ZEROSERVO_1
trigger ZEROSERVOLOOP
function
DO_ZEROSERVO_2
trigger ZEROSERVOLOOP
function
CURRENT_STATE Current state machine value
CURRENT_STATE_TEXT Current state machine value
AB_DAC_RV_LOW_GAIN_1_OLD
DAC RV Channel Low Gain
Setting
AB_DAC_RV_LOW_OFFSET_1_OLD
DAC RV Channel Low Offset
Setting
AB_DAC_RV_LOW_GAIN_2_OLD
DAC RV Channel Low Gain
Setting
AB_DAC_RV_LOW_OFFSET_2_OLD
DAC RV Channel Low Offset
Setting
LAN_RESET Reset Lan Configuration
USB_ENABLE Enable USB
USB_RESET Reset USB
AB_DAC_20_GAIN_1 Dac 20 Gain Value
AB_DAC_20_OFFSET_1 Dac 20 Offset Value
AB_DAC_20_GAIN_1_OLD Dac 20 Gain Value
AB_DAC_20_OFFSET_1_OLD Dac 20 Offset Value
AB_DAC_20_GAIN_2 Dac 20 Gain Value
AB_DAC_20_OFFSET_2 Dac 20 Offset Value
AB_DAC_20_GAIN_2_OLD Dac 20 Gain Value
AB_DAC_20_OFFSET_2_OLD Dac 20 Offset Value
STOP_ZERO_SERVO_LOOP Stop Zero Servo Loop
NETWORK_IDENTIFY Identify Device On Network
LAN_CONFIGURATION LAN Configuration
CHAN_1_RESET Reset Channel 1
CHAN_2_RESET Reset Channel 2
BALANCE_VOLT_ERR Balance Volt. Error
BALANCE_VOLTAGE_1 Balance Voltage
BALANCE_VOLTAGE_2 Balance Voltage
ENABLE_OPEN_WIRE_DETECT Enable Open Wire Detection
NETWORK_ENABLED Network Enable
READING_AVERAGES Reading Averages
Table 4.4 - List of SET and GET Variables for the 1830A