695578
Assembly
1.
Attach the ground wire prior to assembling the electric
starter to the baffle.
2.
Attach the black ground wire to the electric starter
through bolt so the wire extends between the two
adjacent end cap prongs.
3.
Place the starter into the back plate with the ground
wire bolt away from carburetor.
NOTE
The throttle linkage is routed around starter while the gov-
ernor spring is routed through the end cap prongs.
4.
Tighten nuts on starter bolts (see Specifications).
5.
Place blower housing on engine and slide wires
through slot making sure not to cut insulation.
6.
Press grommet into hole.
7.
Reassemble gas tank, air cleaner assembly and face
plate.
Attach Ground
Wire
Starter Prongs
Attach Battery Ground
Lead to Electric Starter
Motor Stud before
attaching to Blower
Housing Baffle.
4-5
