695578
The proper air gap setting between magnets and the
laminations on CDI systems is .0125'’ (.313 mm). Install
gauge, Tecumseh Part No. 670297 between the magnets
and laminations and tighten mounting screws to a torque
of 30-40 inch pounds (3-4.5 Nm). Recheck gap setting to
make certain there is proper clearance between the
magnets and laminations.
Ignition Timing
The flywheel key is what times the ignition for the
engine. If this key is partially sheared from striking an
object with the blade, the timing and engine perfor-
mance could be affected. The key should be inspected
if a performance problem exists.
Crankshaft Keyway
Flywheel Key
P/N 611154
Install Into
Keyway as
Shown
7-2
